3640E Skid Loader

  • Height to Hinge Pin - Fully Raised: 2746 mm
  • Rated Operating Capacity: 476 kg
  • Net Power: 26 kW
Find a Dealer Request More Info
Gehl Compact Equipment Radial Lift Skid Steer Loader


Gehl 3640E Skid Steer Loader

The 3640E is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.

  • Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
  • Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
  • Lift arm hydraulic tubes are concealed and protected from the work environment.
  • Rated operating load can be readily increased with the addition of a counterweight.
Overall Width 1219 mm
Overall Height to Top of ROPS 1178 mm

Operator's Cabin

A large operator’s compartment with clear front, side and rear sight lines provides operators full, expansive views for increased safety.

  • ROPS/FOPS Level II is standard for extra operator protection.
  • Roof grid section and window provide excellent bucket visibility at full height.
  • Adjustable operator restraint bar offers secondary protection and serves as a padded armrest.
  • Lockout system shuts down lift/tilt functions when optional front door is opened.
  • T-bar “hands-only,” hand-foot controls match any operator’s preference.


Gehl 3640E Skid Steer Loader Cabin Controls

Ergonomic controls in the 3640E Skid Loader provide smooth loader and attachment operation.

  • Hand and foot throttle are standard equipment, providing quieter operation and less fuel consumption
  • T-Bar hands-only drive control system


Equipped with a powerful 26 kW Yanmar diesel engine, the 3640E Skid Loader can tackle any challenge.

  • Liquid-cooled for superior performance in all weather conditions.
  • Excellent cold weather starting with glow plug assist system.
Make Yanmar
Model 3TNV88 Stage 3A
Net Power @ rpm 26 kW @ 2800
Maximum Torque @ rpm 108 Nm @ 1680
Displacement 1.6 L


The 3640E provides 55 L/min of hydraulic flow powering a variety of attachments to get work done faster.

  • Direct-drive hydrostatic pump with self-neutralizing feature provides 100% efficient drive from engine to pump, requiring no maintenance
  • Hydraloc™ Automatic Interlock System increases operator safety by locking lift, tilt and drive systems when the operator leaves the seat, raises the restraint bar or turns off the ignition switch.
Auxiliary Hydraulics - Standard 55 L/min
Filtration 4 micron
Reservoir Capacity 30.3 L

Lift Arm

Strong lift arm provides strength, durability and excellent view of the tires and sides of the loader for increased precision and safety.


The 3640E has an ingenious design, including low-maintenance components and easy maintenance access.

  • Entire ROPS/FOPS structure pivots back, with gas-spring assist, for full, easy access to the internal hydraulic components.
  • Swing-open rear door and flip-up engine cover fully expose maintenance access points to engine, battery, filters and filler caps.
  • Maintenance-free axles are lubricated and sealed for long life.
  • Removable access plates for clean out.



A  Overall Operating Height - Fully Raised 3546 mm
B  Height to Hinge Pin - Fully Raised 2746 mm
C  Overall Height to Top of ROPS 1786 mm
D  Ground Clearance to Chassis 152 mm
E  Overall Length with Bucket 2896 mm
F  Overall Length without Bucket 2258 mm
G  Wheelbase 876 mm
H  Dump Reach - Fully Raised 579 mm
I  Rollback at Ground 29°
J  Dump Angle 42°
K  Overall Width  1229 mm
L  Bucket Width 1404 mm
M  Clearance Circle - Rear 1374 mm
N  Clearance Circle - Front without Bucket 1120 mm
O  Clearance Circle - Front with Bucket 1763 mm
P  Seat to Ground Height 828 mm
Q  Rollback at Specified Height 99°
R  Dump Height 2146 mm
S  Departure Angle 26°
Standard Specification Tire Size 27 x 8.5 x 15 HD


Make Yanmar
Model 3TNV88 Stage 3A
Net Power @ rpm 26 kW @ 2800
Maximum Torque @ rpm 108 Nm @ 1680
Displacement  1.6 L

Hydraulic System

Auxiliary Hydraulics - Standard 55 L/min
High-Flow Auxiliary Hydraulics - Option  N/A
Filtration 4 micron
Reservoir Capacity 30.3 L

Electrical System

Battery 675 CCA
Starter 2.3 kW
Alternator 40-amp


Rated Operating CapacityB 476 kg
Rated Operating Capacity with Optional CounterweightB 533 kg
Tipping Load 953 kg
Fuel Tank 39.4 L
Travel Speed - Maximum 9.5 km/hr
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 1814 kg

A - Narrow width with off-set wheel option

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.

Gehl 3640E Skid Loader Diagram

Gehl 3640E Skid Loader Specification Diagram



T-Bar Hand Controls Available Standard
Hand/Foot Controls Available Standard
Joystick Controls Available
Dual-Hand Controls Available


Engine Auto-Shutdown System Optional
Engine Heater Optional
Turbocharged Engine


Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics
Independent Hydraulic Reservoir Standard

Operator Station

Cab Enclosure Optional
Foot or Hand-Controlled Throttle Standard
Full Instrumentation Standard
Heater Optional
Horn Optional
Integral Access Plate (Removable) Standard
Restraint Bar with Padded Armrests/Seat Belts Standard
ROPS/FOPS Level II Overhead Guard, Integral Side Screens Standard
Sound Reduction Package Optional
Suspension Seat Optional
Work Lights, Front and Rear Standard


All-Tach® Attachment Mounting System Standard
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual) Standard
Hydraglide™ System
Hydraloc™ System Standard
Hydrostatic Drive Standard
Lift Arm Support Device Standard
Narrow Offset Wheels Optional
Self-Leveling Lift Action Optional
Skid Plate with Cleanout Standard
Two-Speed Drive
Zero-Maintenance Axles Standard


Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty