Gehl DL12-40 GEN3 Telescopic Handler
Gehl Compact Construction Equipment

DL12-40 GEN:3 
Telescopic Handler

  • Rated Lift Capacity (kg): 12,000 lbs. (5444)
  • Gross Power (kW): 115 hp (86)
  • Maximum Lift Height (m): 40' 4" (12.3)
  • Maximum Forward Reach (m): 26' 4" (8.0)
Find a Dealer Request More Info
Gehl DL12-40 GEN:3 Telescopic Handler

Performance

Gehl DL12-40 GEN:3 Performance

The DL12-40 GEN:3 Telescopic Handler is a tool to increase jobsite productivity, develop new business and improve your return-on-investment.

  • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
  • 10-degree frame tilt in both directions.
  • Double universal joints for tight turn radius without applying stress on the axle.
  • Two-wheel, four-wheel, crab steering standard.
  • Standard centrifugal pre-cleaner and two-stage air cleaner.
  • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
  • Standard pneumatic tires.
  • ROPS and FOPS certified operator's compartment.
Power (kW) 120 hp (89)
Maximum Travel Speed (km/hr) 22.8 mph (36.7)
Turning Radius (m) 12'2" (3.7)
Lift Capacity (kg) 12,000 lbs. (5444)

Operator's Cabin

Comfort comes standard on the DL12-40 GEN:3 Telescopic Handler, boasting 57 cubic feet of interior space.

  • GEN3 F-N-R Single Joystick that allow operators precise movement of heavy loads 
  • Lockable, two-piece cab door for security, communication and cross-ventilation.
  • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
  • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
  • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
Gehl DL12-40 GEN3 Operator's Station Controls

Handling

Gehl DL12-40 GEN3 DL Series Steering
  • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
  • Industry loading job site maneuverability with a 12' 2" turning radius.

Engine

Gehl DL12-40 GEN3 DL Series Engine Access

The DL12-40 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently.

  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
Manufacturer Cummins
Model 3.8L QSF Tier IV
Power (kW) 120 hp (89)
Maximum Travel Speed (km/hr) 22.8 mph (36.7)

Hydraulics

The DL12-40 GEN:3 Telescopic Handler has the hydraulic power to get the job done.

Pump Type Open-Center, Dual-Section
Total Capacity (L/min) 43 gpm (162.8)
Main Relief Pressure (bar) 3,000 psi (207)
Auxiliary Relief Pressure (bar) 2,500 psi (172)
Hydraulic Reservoir Capacity (L) 45 gal. (170)
Gehl DL12-40 GEN3 Telehandler Hydraulics

Attachments

There is a tool for every job, and the DL12-40 GEN:2 can power them all. The DL units feature three attachment options: Dynattach®, Dynacarrier, and Dynacarrier with hydraulic locking.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift - 48" (1219 mm) wide.
E Swing Carriage – 90° and 180° swing.
F Log and Pipe Grapple.
G Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
H Truss Boom - 12' (3.6 m) and 15' (4.5 m) with optional winch.

Serviceability

Side-mounted engine improves serviceability, allowing three-sided service access through a large, hinged hood.

  • Exterior boom hose routings for easy access.
  • Transmission and hydraulics easily accessed through large hinged panel.
  • Easy access to hydraulic oil and transmission reservoirs.
  • Hydraulic main control valve in back door.
  • Rifled bushings in key areas
Show Standard   Show Metric

Specifications (standard)

Capacities
Lift Capacity 12,000 lbs.
Maximum Lift Height 40'4"
Capacity at Maximum Lift Height 10,000 lbs.
Maximum Forward Reach 26'4"
Capacity at Maximum Forward Reach 2,000 lbs.
Maximum Reach Below Grade 1'4"

Load Chart
A 12,000 lbs.
B 10,000 lbs.
C 8,000 lbs.
D 6,000 lbs.
E 4,000 lbs.
F 3,000 lbs.
G 2,000 lbs.



Gehl DL12-40 GEN3 Telehandler Load Chart

Loader Performance
Breakout Force 14,000 lbf
Maximum Dump Height 39'0"
Maximum Forward Reach at 45° Dump Angle 11'10"
Dump Angle at Maximum Dump Height 24° 
Maximum Loadover Height 40'3"
Maximum Dump Height at 45° Dump Angle 30'9"
Maximum Forward Reach at Maximum Dump Height 1'2"
Rollback at Ground Level 30°
Total Degrees of Bucket Rotation 132° 

Engine
Manufacturer Cummins
Model 3.8L QSF Tier IV
Power  120 hp
Aspiration Turbocharged
Rated Speed 2,500 rpm

Components
Transmission 4-Speed Power Shift
Maximum Travel Speed  22.8 mph
Selective Steering 4-Wheel
2-Wheel
Crab
Brakes Oil-Immersed, Disc-type
Parking Brake Spring-Applied, Hydraulic Release

Hydraulics
Pump Type Open-Center, Dual-Section
Total Capacity  43 gpm
Main Relief Pressure  3,000 psi
Auxiliary Relief Pressure 2,500 psi
Hydraulic Reservoir Capacity  45 gal. 

General Specifications
Approximate Weight 25,300 lbs. 
Length - Less Forks 19'4"
Width 8'3"
Ground Clearance 16"
Wheelbase 10'8"
Turning Radius 12'2"
Overall Height 7'11"
Frame Leveling - Left/Right 10°/10°
Fuel Capacity 30 gal.
Recommended Tire Type 14.00 x 24 G2 12-ply








Specifications (metric)

Capacities
Lift Capacity 5444 kg
Maximum Lift Height 12.3 m
Capacity at Maximum Lift Height 4536 kg
Maximum Forward Reach 9.2 m
Capacity at Maximum Forward Reach 908 kg
Maximum Reach Below Grade 406 mm

Loader Performance
Breakout Force 62.2 kN
Maximum Dump Height 11.9 m
Maximum Forward Reach at 45° Dump Angle 3.6 m
Dump Angle at Maximum Dump Height 24° 
Maximum Loadover Height 12.3 m
Maximum Dump Height at 45° Dump Angle 9.4 m
Maximum Forward Reach at Maximum Dump Height 356 m
Rollback at Ground Level 30° 
Total Degrees of Bucket Rotation 132° 

Engine
Manufacturer Cummins
Model 3.8L QSF Tier IV
Power  89 kW
Aspiration Turbocharged
Rated Speed 2500 rpm

Components
Transmission 4-speed Powershift
Maximum Travel Speed 36.7 km/hr
Selective Steering 4-Wheel
2-Wheel
Crab
Brakes Oil-Immersed, Disc-type
Parking Brake Spring-Applied, Hydraulic Release

Hydraulics
Pump Type Open-Center, Dual-Section
Total Capacity  162.8 L/min
Main Relief Pressure  207 bar
Auxiliary Relief Pressure 172 bar
Hydraulic Reservoir Capacity  170 L

General Specifications
Approximate Weight 11,475 kg
Length - Less Forks 5.9 m
Width 2.5 m
Ground Clearance 400 mm
Wheelbase 3.3 m
Turning Radius 3.7 m
Overall Height 2.4 m
Frame Leveling - Left/Right 10°/10°
Fuel Capacity 114 L
Recommended Tire Type 14.00 x 24 G2 12-ply









Options

Boom Length

 44'

Engine
Air Filter Pre-Cleaner Standard
Cold Weather Start Aid Standard
Cummins 3.8L QSF Engine Standard

Hydraulic System
Auxiliary Hydraulics Optional

Undercarriage
Transmission Cut-out Standard

Electrical System
12-volt DC, Negative Ground Standard
Alternator, 90A Standard
Battery with 900 Cold-Cranking Amps Standard
Fuse Panel for Circuit Protection Standard

Structure
10° Frame Leveling Standard
Dynattach® Mount Optional
Dyncarrier® Optional
Fenders Standard
Lockable Storage Compartment Standard
Outriggers Optional

Operator Station
Air-Conditioning Optional
Dual-Function Joystick Boom Control Optional
Tri-Function Joystick Boom Control Optional
Enclosed Cab with Heater/Defroster Optional
FOPS Structure Standard
ROPS Structure Standard
Suspension Seat Standard
Tilt Steering Column Standard

Instrumentation
Gauges: fuel level, hourmeter, oil pressure, water temperature, system voltage Standard
Visual Indicators: boom angle, boom extension, frame angle Standard

Optional Systems
Personnel Work Platform (PWP) System Optional
Remote Boom Control (RBC) System Optional

Lights
Work Light Package Optional









Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter

© Copyright 2018. All rights reserved. A Manitou Group Brand.
Terms of use • Privacy Policy • Governance