Performance The RS5-19 GEN:3 is built to work hard. Compact size 5' 11" wide & 6' 4" tall Total weight of 10,000 lbs With a ground clearance of 14" Two section telescopic boom has full hydraulic power for all lift and telescopic functions Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised. Inboard wet-disc service brakes Limited slip differential is located on front axle. Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab System Pressure (bar) 3,350 psi (231) Hydraulic System Total Capacity (L/min) 20 gpm (83)
Operator's Cabin The operator’s cab in the RS5-19 GEN:3 Telescopic Handler is anything but compact. A modern, ergonomic design maximizes comfort. High-back seat with right-side adjustable armrest; suspension seat optional. Locking storage compartment under seat. Full 360° visibility. Ergonomic design features all gauges, indicator lights and switches on the right-side dash panel ROPS/FOPS canopy standard; ROPS/FOPS cab with heater or ROPS/FOPS cab with heater & A/C optional
Handling To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch in the operator’s station.
Engine The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently. Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair. Rexroth 2-speed hydrostatic transmission. Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. Manufacturer Yanmar Model 4TNV98C Tier IV Power (kW) 69 hp (50.1) Maximum Travel Speed (km/hr) 15 mph (24) Rated Speed 2,500 rpm
Hydraulics The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance. Pump Type Gear Total Capacity (L/min) 20 gpm (83) System Pressure (bar) 3,350 psi (231) Hydraulic Reservoir Capacity (L) 18 gal. (68)
Attachments There is a tool for every job, and the RS5-19 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease. A Carriages – Masonry, framing and standard carriages available in different widths. B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide. C Fork Shift - 50" (1270 mm) wide. D Truss Boom- 5' long. E Bucket - Light Material - 71" wide.
Serviceability The RS5-19 GEN:3 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance. The engine hood lifts fully out of the way, providing easy access to the battery and engine maintenance A hinged access door provides easy access to the engine oil drain Hydraulic oil fill cap is located on the top of the engine compartment for easier access, with a spill guard for extra protection A protective sleeve over the exhaust pipe increases safety when working on the engine A dual-element air filter protects the engine from airborne contaminants
Specifications (standard) Capacities Lift Capacity 5,500 lbs. Maximum Lift Height 19'1" Capacity at Maximum Lift Height 3,000 lbs. Maximum Foward Reach 11'0" Capacity at Maximum Forward Reach 1,850 lbs. Maximum Reach Below Grade 0" Load Chart A 5,500 lbs. B 4,000 lbs. C 3,000 lbs. D 2,000 lbs. E 1,850 lbs. Engine Manufacturer Yanmar Power 69 hp Aspiration Natural Model 4TNV98C Tier IV Rated Speed 2500 rpm Components Transmission Rexroth 2-speed Maximum Travel Speed 15 mph Selective Steering 4-wheel 2-wheel Crab Brakes 2-Wheel Hydraulically Actuated Internal Wet-Disc Brake Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle Axle Manufacturer Dana Hydraulic System Pump Type Gear Total Capacity 20 gpm System Pressure 3350 psi Hydraulic Reservoir Capacity 18 gal. General Specifications Approximate Weight 10,000 lbs. Length 12'4" Width 5'11" Ground Clearance 14" Wheelbase 7'6" Turning Radius 11'0" Overall Height 6'4" Frame Leveling N/A Fuel Capacity 17 gal. Tire Options 12.00 x 16.5 Bias/10 PR 12.00 x 16.5 Bias/10 PR Foam-Filled 12.00 x 16.5 Solid Rubber
Specifications (metric) Capacities Lift Capacity 2495 kg Maximum Lift Height 5.8 m Capacity at Maximum Lift Height 1361 kg Maximum Foward Reach 3.4 kg Capacity at Maximum Forward Reach 840 kg Maximum Reach Below Grade 0 mm Engine Manufacturer Yanmar Power 50.1 kW Aspiration Natural Model 4TNV98C Tier IV Rated Speed 2500 rpm Components Transmission Rexroth 2-speed Maximum Travel Speed 24 km/hr Selective Steering 4-wheel 2-wheel Crab Brakes 2-Wheel Hydraulically Actuated Internal Wet-Disc Brake Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle Axle Manufacturer Dana Hydraulic System Pump Type Gear Total Capacity 76 L/min System Pressure 231 bar Hydraulic Reservoir Capacity 68 L General Specifications Approximate Weight 4536 kg Length 3.8 m Width 1.80 m Ground Clearance 350 mm Wheelbase 2.29 m Turning Radius 3.35 m Overall Height 1.93 m Frame Leveling N/A Fuel Capacity 64 L Tire Options 12.00 x 16.5 Bias/10 PR 12.00 x 16.5 Bias/10 PR Foam-Filled 12.00 x 16.5 Solid Rubber
Warranty Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below. Gehl Warranty